MCZ Club Manuel d'instructions télécharger pdf (Page 43)

PELLET STOVES Chapter 4

INSTALLATION AND USE MANUAL

page 43

Operation Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited

6. EMERGENCY PANEL

At the right rear of the stove, there is an emergency panel. It was

designed to diagnose any operating anomalies. It is also used to control

the stove if the remote control is not working.

KEY

A. Three figure display which indicates a series of information

about the stove, as well as the identification code for any

operating anomaly.

B. GREEN

LED to indicate:

 OFF = Stove off

 FLASHING = Stove in lighting phase

 ON STEADY = Stove on

C. RED

LED to indicate:

 OFF = Stove on

 FLASHING SLOWLY = Stove shutting down

 FLASHING RAPIDLY = Stove in alarm status

(accompanied for 10 minutes by a beep)

 ON STEADY = Stove off

D. Three-position selector for function

 OFF = Stove shut off manually in absence of remote

control

 REMOTE = Stove can be controlled only by remote

control

 ON = Stove turned on manually in absence of remote

control

E. Three-position selector for selection of power

 MIN = Selector to run the stove at minimum power with

no remote control and with selector 4 in ON position

 MED = Selector to run the stove at medium power with

no remote control and with selector

in ON position

 MAX = Selector to run the stove at maximum power with

no remote control and with selector

in ON position

F. Push button for diagnostics of stove operating status

G. button to connect the stove to a new remote control (by means

of a procedure explained below)

TO OPERATE THE STOVE WITH THE REMOTE

CONTROL, SELECTOR "D" MUST BE PLACED

ON “REMOTE”

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 64 65

Commentaires sur ces manuels

Pas de commentaire

MCZ Club Manuel d'instructions Page 43

Commentaires sur ces manuels

Produits connexes et manuels pour Poêles MCZ Club