MCZ Club Manuel d'instructions télécharger pdf (Page 30)

PELLET STOVES Chapter 3

INSTALLATION AND USE MANUAL

page 30

Installation and assembly Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited

3.4.6. Assembling the frontal/side panel and top on the Toba stove

The Toba stove has three parts requiring assembly:

o Front panel in:

 Ceramic

 Steatite

o Sides made of steel

o Top

The front panel

made in ceramics

is delivered with the ceramics

secureed onto the iron frame, therefore it is sufficient to secure it onto

the stove structure using the two upper screws and the two lower

screwsi (P).

Whereas the front panel made

in steatite

has to be assembled. The

steatite tiles shall be delivered on a pallet while the iron frame of the

panel shall be on the pallet with the stove.

Tiles M-N have to be unpacked, lay the panel frame horizontally and

position the tiles following correspondence of the holes on the frame

with the threaded inserts for secureing with the supplied screws. Once

the steatite tiles have been secureed, proceed with secureing the panel

to the structure as for the panel with ceramic tiles.

IN FRONT

BEHIND

The steel side panels are secureed to the structure of the stove by

sliding the apposite plugs A-B found on the lower part of the panels

into the holes (a) found on the base of the stove. Once in position

secure the side panel onto to upper part of the stove using the two

screws (b-c).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 64 65

Pas de commentaire

MCZ Club Manuel d'instructions Page 30