Mcz Boxsystem 75 FR Manuel d'utilisateur télécharger pdf (Page 18)

Chapter 4

INSTALLATION AND USE MANUAL

page 18

4.3. GENERAL ASSEMBLY RULES

The insert can either be inserted on existing fireboxes or inserted as an

autonomous firebox thanks to its self-supporting structure.

If the insert is positioned in an existing firebox,

check that the dimensions of the firebox are

compatible for insertion.

If the insert is positioned over a floor or close to

walls made of flammable materials, these surfaces

should be suitably insulated in a safe manner.

The Superclima model has special requirements for

positioning and assembly. The installer should refer

to section 4.5

4.4. ASSEMBLY OF THE INSERTS (all models)

To facilitate insertion of the insert, especially on an irregular existing

firebox surface, the optional INSERTION GUIDE FRAME can be

used, while the flue gas connection can be made using the optional

TELESCOPIC CONNECTION

These accessories are not available for

the SmartBox model.

For this operation just fix the frame (A) to the firebox surface using the

plugs (D) provided and, if necessary, use shims to level the frame.

Together with the insertion guide it is recommended to also use the

telescopic connection (B) that can be screwed onto the insertion guide

using the anchorings (C) and allows to make the connection to the

chimney flue before inserting the product

(see section 4.5.2)

The "Insertion guide" and "Telescopic connection"

accessories are not available for the Smartbox

model.

4.5. CONNECTION TO THE CHIMNEY FLUE (all models)

We recommend connecting the insert to the chimney flue using pipes

and bends in aluminium-clad steel, capable of withstanding the high

temperatures reached in that section of pipe and resisting corrosion

from the fumes. These connecting pipes are available on request in

various sizes (see MCZ accessories), and they simplify installation since

they are assembled by fitting one into another.

Flexible pipes in steel or aluminium cannot be used

to connect the insert to the chimney flue as they are

prohibited by current regulations.

4.5.1. Direct connection between insert and flue

pipe

Drill and disassemble the existing clay hood and engage the elements

in the chimney flue, being careful not to exceed the 45° inclination and

to correctly carry out any infilling necessary in order to prevent soot or

ashes of the chimney flue from settling above the insert.

(Figure 3)

Infill of direct flue gas connection

Insertion guide positioning and telescopic

connection

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 36 37

Commentaires sur ces manuels

Pas de commentaire

Mcz Boxsystem 75 FR Manuel d'utilisateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Four Mcz Boxsystem 75 FR